Valve Stem Seals: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
During engine repair procedures, cleanliness is extremely important. Any foreign material (including any material created while cleaning gasket surfaces) that enters the oil passages, coolant passages or the oil pan can cause engine failure.
- Refer to: JACKING AND LIFTING - OVERVIEW .
- Refer to: Valve Springs .
- Discard the specified component. Follow local disposal regulations.
Special Tool(s) : 303-468 (Remover, Valve Stem Oil Seal) , 307-005 (Slide Hammer)