LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 2.0L ECOBOOST) >> Removal and Installation >> Valve Stem Seals >> Installation

Valve Stem Seals: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply the specified lubricant to the specified component.

    Special Tool(s)  : 303-470 (Installer, Valve Stem Oil Seal) 

    Material  : Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil / XO-5W30-QSP (WSS-M2C946-A)

    Fig 1: Installing Valve Stem Seals
    G08063216Courtesy of FORD MOTOR CO.
  2. Refer to: Valve Springs  .
scientia non olet · About LEMON Manuals