Removal and Installation: Flywheel: Installation
WARNING: This page is about a different variant/trim than selected.
- Special Tool(s)
: 303-103 (Holding Tool, Flywheel)
Torque :
Stage 1: 50 Nm
Stage 2: 80 Nm
Stage 3: 112 Nm
- Refer to: CLUTCH DISC AND PRESSURE PLATE - VEHICLES WITH: 5-SPEED MANUAL TRANSMISSION - MTX75 .
- After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure.
NOTE:
Special bolts are used for installation. Do not use standard bolts.