LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 2.0L ECOBOOST) >> Disassembly and Assembly of Subassemblies >> Piston >> Disassembly

Disassembly and Assembly of Subassemblies: Piston: Disassembly

WARNING: This page is about a different variant/trim than selected.
NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the connecting rod reassembly.
  1. Discard the specified component. Follow local disposal regulations.
    Fig 1: Locating Piston Rings
    G08063409Courtesy of FORD MOTOR CO.
  2. Discard the specified component. Follow local disposal regulations.
    Fig 2: Locating Piston Pin And Retainers
    G08063410Courtesy of FORD MOTOR CO.
    • Separate the piston and connecting rod.
    • Clean and inspect the piston and connecting rod. MISSING RE
    Fig 3: Separating Piston From Connecting Rod
    G08063411Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals