LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Cooling System - 2.0L ECOBOOST) >> Removal and Installation >> Degas Bottle >> Installation

Degas Bottle: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Fill the degas bottle.

    Material: Motorcraft® - Orange Antifreeze/Coolant Prediluted / VC-3DIL-B (WSS-M97B44-D2)

  3. Fig 1: Identifying Pressure Relief Cap
    G08063643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals