LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Cooling System - 2.0L ECOBOOST) >> Diagnosis and Testing >> Engine Cooling >> Diagnostic Routine(s) >> The Engine Does Not Reach Normal Operating Temperature >> Possible Sources

Possible Sources

WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC TROUBLE CODE (DTC) FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P0125 Insufficient Coolant Temp for Closed Loop Fuel Control Sets in the PCM when the CHT sensor has not achieved the required temperature level to enter closed loop operating conditions within a specified amount of time after starting the engine.
P0128 Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) Sets in the PCM when the thermostat monitor has not achieved the required engine operating temperature within a specified amount of time after starting the engine.
scientia non olet · About LEMON Manuals