LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.0L ECOBOOST) >> Removal and Installation >> Cylinder Head Temperature (CHT) Sensor >> Installation

Cylinder Head Temperature (CHT) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
    • To install, reverse the removal procedure.
    • Install a new CHT sensor.
  2. Fig 1: Installing Air Cleaner Outlet Pipe And Turbocharger Inlet Pipe
    G08063995Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals