LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.0L ECOBOOST) >> Removal and Installation >> Camshaft Position (CMP) Sensor RH >> Removal

Camshaft Position (CMP) Sensor RH: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.
  1. Refer to: Health and Safety Precautions  ( HEALTH AND SAFETY PRECAUTIONS ).
    1. Torque  : 10 Nm
    2. Torque  : 5 Nm
    Fig 1: Locating Turbocharger Hose Clamps And Bolt
    G08063793Courtesy of FORD MOTOR CO.
  3. Torque  : 7 Nm
    Fig 2: Locating Camshaft Position (CMP) Sensor RH Harness Connector And Bolt
    G08063956Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals