LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0571 - P1674) >> DTC P1336: Crankshaft/Camshaft Sensor Range/Performance

DTC P1336: Crankshaft/Camshaft Sensor Range/Performance

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P1336 - CRANKSHAFT/CAMSHAFT SENSOR RANGE/PERFORMANCE

Description:  This DTC sets when the input signal from the crankshaft position (CKP) sensor or the camshaft position (CMP) sensor is erratic.
Possible Causes: 
  • Damaged CKP sensor
  • Damaged CMP sensor
  • Base engine concerns
  • Harness concerns
Diagnostic Aids:  Check the harness for routing, alterations, incorrect shielding, or electrical interference from other systems.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST JD .