DTC P052C: Cold Start Intake (A) Camshaft Position Timing Over-Advanced (Bank 2)
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P052C - COLD START INTAKE (A) CAMSHAFT POSITION TIMING OVER-ADVANCED (BANK 2)
| Description: The PCM monitors the variable camshaft timing (VCT) position for an over-advanced camshaft timing during cold start up. The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. | |||
Possible Causes:
|
|||
| Diagnostic Aids: This DTC is a functional check of the VCT unit. Diagnose any base engine concerns related to the engine oil pressure or engine timing. Refer to the appropriate Engine System - General Information article, Oil Pressure Test, to check the engine oil pressure. Refer to the appropriate Engine article, Timing Drive Components, to check the engine timing. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HK . | ||