LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0193 - P0563) >> DTC P0459: Evaporative Emission System Purge Control Valve Circuit High

DTC P0459: Evaporative Emission System Purge Control Valve Circuit High

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0459 - EVAPORATIVE EMISSION SYSTEM PURGE CONTROL VALVE CIRCUIT HIGH

Description:  This DTC sets when the EVAPCP circuit output driver signal moves outside the minimum or maximum limit for the commanded state.
Possible Causes: 
  • EVAPCP circuit short to voltage
  • Damaged EVAP purge valve
  • Damaged PCM
Diagnostic Aids:  To verify normal function, monitor the EVAPCP PID. With the valve closed, the EVAPCP indicates 0% duty cycle. When the valve is commanded fully open, the EVAPCP indicates 100% duty cycle.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST HZ .