LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0001 - P0192) >> DTC P0127: Intake Air Temperature (IAT) Too High

DTC P0127: Intake Air Temperature (IAT) Too High

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0127 - INTAKE AIR TEMPERATURE (IAT) TOO HIGH

Description:  This DTC sets when the intake air temperature 2 (IAT2) sensor has detected a concern in the charge air cooler (CAC) system.
Possible Causes: 
  • Blockage of heat exchangers
  • Low fluid level
  • Fluid leakage
  • CAC pump or relay failure
  • Crossed CAC coolant lines
Diagnostic Aids:  Monitor the IAT2 PID. A typical IAT2 temperature should be greater than the IAT temperature.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DU .