LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0001 - P0192) >> DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH

Description:  This DTC sets when the sensor operating voltage is greater than the maximum allowable calibrated parameter of 4.96 volts.
Possible Causes: 
  • VREF circuit short to voltage
  • MAP circuit open or short to voltage
  • Open circuit
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
F-150 3.5L,
Flex 3.5L GTDI,
MKS 3.5L,
MKT 3.5L,
Taurus 3.5L
GTDI
GO to PINPOINT TEST DN .
All others GO to PINPOINT TEST DM .