LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0001 - P0192) >> DTC P0106: Manifold Absolute Pressure (Map/BARO) Sensor Range/Performance

DTC P0106: Manifold Absolute Pressure (Map/BARO) Sensor Range/Performance

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP/BARO) SENSOR RANGE/PERFORMANCE

For Vehicles With 3.5L GTDI Engine 
Description:  This DTC sets when the manifold absolute pressure (MAP) PID does not correlate with the barometric pressure (BARO) and the throttle intake pressure (TIP_PRS_BOOST) PIDs at ignition ON. It will also set if the MAP and TIP_PRS_BOOST PIDs fail to correlate when running, but the TIP_PRS_BOOST PID does correlate with the BARO PID at idle.
Possible Causes: 
  • Slow responding manifold absolute pressure (MAP)/intake air temperature 2 (IAT2) sensor
  • Damaged MAP/IAT2 sensor
Diagnostic Aids: 
For All Others 
Description:  This DTC sets when the MAP sensor input is not within the calibrated value.
Possible Causes: 
  • Slow responding MAP sensor
  • Damaged MAP sensor
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
F-150 3.5L,
Flex 3.5L
GTDI,
MKS 3.5L,
MKT 3.5L,
Taurus 3.5L
GTDI
GO to PINPOINT TEST EA .
All others GO to PINPOINT TEST DM .