LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0001 - P0192) >> DTC P0096: Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)

DTC P0096: Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0096 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1)

Description:  This DTC sets when the intake air temperature 2 (IAT2) PID does not correlate with the charge air cooler temperature (CAC_T) or the intake air temperature (IAT) PIDs at ignition ON. It will also set if the IAT2 PID exceeds the maximum calibrated temperature threshold while driving.
Possible Causes: 
  • Slow responding manifold absolute pressure (MAP)/intake air temperature 2 (IAT2) sensor
  • Damaged MAP/IAT2 sensor
Diagnostic Aids:  The MAP/IAT2 sensor is located on top of the intake manifold.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST EA .