LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Powertrain Control Hardware >> Fuel Pump Driver Module (FPDM)

Fuel Pump Driver Module (FPDM)

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

The FPDM receives a duty cycle signal from the PCM and controls the fuel pump operation in relation to this duty cycle. This results in variable speed fuel pump operation. The FPDM controls the fuel pump by switching the fuel pump return circuit ON and OFF at the required duty cycle. The FPDM sends diagnostic information to the PCM on the FPM circuit. For additional information on the fuel pump control and the fuel pump monitor, refer to FUEL SYSTEMS .