PTO Circuits Description
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
The 3 PTO input circuits are PTO mode, PTO engage, and PTO RPM.
The PTO engage circuit is used when the operator is requesting the PCM to check the needed inputs required to initiate the PTO engagement.
The PTO RPM circuit is used when the operator is requesting additional engine RPM for PTO operation.