LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Engine Control Components >> Charge Air Cooler Temperature (CACT) Sensor

Charge Air Cooler Temperature (CACT) Sensor

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

The CACT sensor is located in the intake air tube between the charge air cooler (CAC) and the throttle body. The CACT sensor measures the throttle inlet temperature. The PCM uses the CACT sensor information to refine the estimate of the airflow rate through the throttle and to determine the desired boost pressure. The CACT sensor for a speed density system is integrated with the turbocharger boost pressure (TCBP) sensor.

Fig 1: Identifying Typical CACT Sensor Integrated With TCBP Sensor
G06290475Courtesy of FORD MOTOR CO.