LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation - Brake Booster - Except Electric >> Removal and Installation >> Brake Booster >> Removal

Brake Booster: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Brake Master Cylinder  (BRAKE MASTER CYLINDER ).
  2. Discard the specified component. Follow local disposal regulations.

    Torque  : 25 Nm

    Fig 1: Removing Booster Rod-To-Pedal Pin
    G08056163Courtesy of FORD MOTOR CO.
  3. Fig 2: Locating Brake Booster Cable Bolt
    G08056164Courtesy of FORD MOTOR CO.
  4. Fig 3: Removing Brake Booster
    G08056165Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals