Normal Operation and Fault Conditions
The RCM monitors the LH seat track position sensor circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted LH seat track position sensor
If a fault is detected, the RCM stores DTC B00B5:11, B00B5:12, B00B5:13 or B00B5:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B00B5:11 | Driver Seat Track Position Restraints Sensor: Circuit Short to Ground | A fault is indicated when the RCM senses a short to ground on the LH seat track position sensor circuit. |
| B00B5:12 | Driver Seat Track Position Restraints Sensor: Circuit Short to Battery | A fault is indicated when the RCM senses a short to voltage on the LH seat track position sensor circuit. |
| B00B5:13 | Driver Seat Track Position Restraints Sensor: Circuit Open | A fault is indicated when the RCM senses an open on either LH seat track position sensor circuit. |
| B00B5:1D | Driver Seat Track Position Restraints Sensor: Circuit Current Out of Range | A fault is indicated when the RCM senses current out of an acceptable range on the LH seat track position sensor circuit. |