DTC P0704: Clutch Switch Input Circuit
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0704 - CLUTCH SWITCH INPUT CIRCUIT
| Description: When the clutch pedal is applied the voltage goes to low. This DTC sets if the PCM does not see this change from high to low. | |||
Possible Causes:
|
|||
| Diagnostic Aids: When the clutch pedal is applied and then released, the switch voltage should cycle. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TA . | ||