LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus ST >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Controls (Except Diesel & Hybrid) - Powertrain DTC Descriptions - DTC P0001 - P0192) >> DTC P0098: Intake Air Temperature Sensor 2 Circuit High

DTC P0098: Intake Air Temperature Sensor 2 Circuit High

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2012 Lincoln Navigator L, 2012 Lincoln Navigator, 2012 Lincoln MKZ, 2012 Lincoln MKX, and 2012 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
P0098 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT HIGH

Description:  This DTC sets when the sensor signal is greater than the self-test maximum. The intake air temperature 2 (IAT2) sensor maximum is 4.6 volts.
Possible Causes: 
  • IAT2 circuit open or short to voltage
  • Incorrect harness connection
  • Damaged IAT2 sensor
Diagnostic Aids:  Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
F-150 3.5L,
Flex 3.5L GTDI,
MKS 3.5L,
MKT 3.5L,
Taurus 3.5L
GTDI
GO to PINPOINT TEST DN .
All others GO to PINPOINT TEST DU .