Fuel Lines: Removal
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before beginning any service procedure in this service information, refer to Safety Warnings in GENERAL INFORMATION
. Failure to follow this instruction may result in serious personal injury.
- 2.
Release the fuel system pressure. Refer to: FUEL SYSTEM PRESSURE RELEASE .
- 3.
Remove the battery. Refer to: Battery .
- 4.
Disconnect the fuel jumper tube-to-fuel injection pump spring lock coupling. Disconnect the Evaporative Emission (EVAP) vapor tube quick release coupling. Disconnect the fuel pressure sensor electrical connector, and disconnect the 2 front brake tube fitting-to-middle brake tube fitting.Torque
: 133 lb.in (15 Nm)
- 13.
Disconnect the 2 middle brake tube fitting-to-rear brake tube fitting. Disconnect the fuel supply tube and Evaporative Emission (EVAP) vapor tube quick release coupling.Torque
: 133 lb.in (15 Nm)