- Loss of power/performance
|
- Clogged Air Cleaner (ACL) element
- Loose connections or damage to air intake hoses and tubes
- Malfunctioning fuel system
- Poor fuel quality
- Engine wear (piston rings, valve guides)
- Turbocharger turbine or compressor wheel damage
- Damaged exhaust or exhaust leaks at turbocharger housing
- Malfunctioning turbocharger bypass valve
- Obstructed wastegate actuator linkage
- Damaged wastegate actuator linkage
- Wastegate actuator operation
- PCM - Diagnostic Trouble Codes (DTCs)
|
- INSTALL a new Air Cleaner (ACL) element. TEST the system for normal operation.
- TIGHTEN the hose clamps. INSPECT for damage and REPAIR as necessary.
- DRAIN and FILL with fresh fuel.
- REPAIR as required.
- INSPECT the turbocharger. REFER to the CHECK FOR FREE ROTATION - Off Vehicle
.
- INSPECT for leaks. Leaks can usually be detected audibly or visually, by a discoloration caused by escaping hot exhaust gases. REPAIR as required.
- INSPECT the turbocharger wastegate linkage for obstructions. REPAIR as required.
- INSPECT the turbocharger wastegate linkage for damage. INSTALL a new turbocharger as necessary.
- REFER to: Electronic Engine Controls
(
ELECTRONIC ENGINE CONTROLS
.
MIL Code List.
|