LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus ST >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center, And Warning Chimes - Except Electric >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> The Low Fuel Warning Chime Is Inoperative Or Always Sounds >> Pinpoint Test BD: The Low Fuel Warning Chime Is Inoperative Or Always Sounds

Pinpoint Test BD: The Low Fuel Warning Chime Is Inoperative Or Always Sounds

  1. BD1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes:  GO to BD2
    2. No:  GO to Pinpoint Test BJ 
  2. BD2 CHECK THE LOW FUEL INDICATOR 
    • Verify that the low fuel indicator is operating correctly.

    Does the low fuel indicator operate correctly? 

    1. Yes:  INSTALL a new IPC.

      REFER to: Instrument Panel Cluster (IPC)  .

    2. No:  GO to Pinpoint Test AK 
scientia non olet · About LEMON Manuals