LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Flex SEL, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center, And Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Removal

Instrument Panel Cluster (IPC): Removal

NOTE: If installing a new Instrument Panel Cluster (IPC), all vehicle keys are erased during the parameter reset procedure. Verify at least 2 of the vehicle keys are available prior to carrying out this procedure.
  1. If installing a new IPC, upload the module configuration information to the scan tool. Refer to MODULE CONFIGURATION .
  2. Remove the IPC finish panel. Refer to INSTRUMENT PANEL AND CONSOLE .
  3. Lower the steering column to the lowest position.
  4. Remove the 4 screws and the IPC.
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals