Network Message Chart
MODULE NETWORK INPUT MESSAGES - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Adaptive cruise control warning | C-CM | Input used to control adaptive cruise control high priority warning chime. |
| Stability-traction control warning request | ABS module | Input used to control the service AdvanceTrac® warning chime. |
| Belt-Minder® warning request | RCM | Input used to control the Belt-Minder®. |
| Adaptive cruise control message display | PCM | Input used to control adaptive cruise control low priority warning chime. |
| Cross traffic information | SOD-L | Input used to control the BLIS®/CTA chime. |
| Cross traffic information | SOD-R | Input used to control the BLIS®/CTA chime. |
| Drivers door ajar status | BCM | Provides the driver door ajar input to control the door ajar warning chime. |
| Forward collision warning chime request | C-CM | Input used to control the forward collision warning chime. |
| Headlamps on warning chime command | BCM | Input used to control the headlamps on chime. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| Key-in-ignition warning chime command | BCM | Input used to control the key-in-ignition warning chime. |
| Left rear door ajar status | BCM | Provides the left rear door ajar input to control the door ajar warning chime. |
| Liftgate/luggage compartment lid ajar status | BCM | Provides the liftgate ajar input to control the door ajar warning chime. |
| Memory feedback request | DSM | Provides the chime request and update chime request inputs to control the memory feedback warning chime. |
| Parking aid audible warning status | PAM | Input used to control the active park assist chime. |
| Parking aid audible warning status front | PAM | Input used to control the active park assist chime. |
| Parking aid audible front target warning | PAM | Input used to control the active park assist chime. |
| Park brake chime request | BCM | Input used to control the parking brake warning chime. |
| Passenger door ajar status | BCM | Provides the passenger door ajar input to control the door ajar warning chime. |
| Passenger rear door ajar status | BCM | Provides the right rear door ajar input to control the door ajar warning chime. |
| Perimeter alarm chime request | BCM | Input used to control the perimeter alarm chime. |
| Safety belt warning chime request | RCM | Input used to control the safety belt warning chime. |
| Steering wheel switch turn signal | SCCM | Input used to control the turn signal left on warning chime. |
| Turn indicator command | BCM | Provides combined messages to control the RH/LH and hazard turn chime tone (tick-tock). |