Key-In-Ignition Warning Chime

On vehicles without IA, the key-in-ignition warning chime warns that the key is still in the ignition when the driver door is ajar. On vehicles with IA, the key-in-ignition warning chime sounds when the ignition is in the ON state with the door ajar.

On vehicles with IA and a automatic transaxle, the key-in-ignition warning chime is also used when the ignition is in the OFF mode with the transaxle range selector out of park. The message center displays a warning message and the chime sounds.

The key-in-ignition warning chime inputs are:

• Ignition state.
• Key-in-ignition chime request to the IPC from the BCM over the MS-CAN (without IA).
• Key-in-ignition chime request to the IPC from the Remote Function Actuator (RFA) module over the MS-CAN (with IA).
• Door ajar input to the BCM.