Pinpoint Test Ac: The Transaxle Range Display Is Never On
- AC1 VERIFY THE INTEGRATED CIRCUIT DISPLAY FUNCTIONS
- Ignition ON.
- Observe the odometer in the integrated display.
- Does the odometer display illuminate?
- Yes : GO to AC2.
- No : GO to PINPOINT TEST A .
- AC2 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST
- Check for recorded IPC DTCs from the self-test.
- Are any DTCs recorded?
- Yes
: For DTC U0100:00, GO to PINPOINT TEST AM .
For DTC U0101:00, GO to PINPOINT TEST AN .
- No : GO to AC3.
- AC3 RETRIEVE THE RECORDED DTCs FROM THE TCM SELF-TEST
- Check for recorded TCM DTCs from the self-test.
- Are any DTCs recorded?
- Yes : REFER to AUTOMATIC TRANSMISSION .
- No : INSTALL a new IPC. REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.