Removal and Installation

Upper Cowl Panel and Lower Cowl Panel 

1. Remove the wiper blade arms. For additional information, refer to WIPERS AND WASHERS .
2. Remove the 6 upper cowl panel-to-lower cowl panel clips.
3. Remove the upper cowl panel.

   Lower Cowl Panel 

4. Remove the headlamp assemblies. For additional information, refer to EXTERIOR LIGHTING .
5. Remove the 4 lower cowl panel bolts.
6. Release the brake booster vacuum hose from the clip on the lower cowl panel.
7. Remove the lower cowl panel.

   All 

8. To install, reverse the removal procedure.