Safety Belt Warning Chime
The safety belt warning chime warns that the driver safety belt is not fastened and sounds when the driver safety belt is not fastened, the ignition is transitioned from the OFF/LOCK or ACC state to the RUN or START state.
The safety belt warning chime stops sounding when the safety belt is fastened, the ignition is transitioned from the RUN or START state to the OFF/LOCK or ACC state, or the chime has sounded for approximately 6 seconds.
The safety belt warning chime inputs are the:
- Ignition state.
- Driver safety belt warning request communicated by the RCM to the IPC through the HS-CAN.
- Driver safety belt warning chime request communicated by the RCM to the IPC through the HS-CAN.