Information and Message Center

The message center is integrated into the Front Control/Display Interface Module (FCDIM). The message center is controlled by the IPC and acts upon much of the same information that is input and used to operate the IPC gauges, informational indicators, and warning indicators. The FCDIM receives the message center display information from the IPC over the MS-CAN communication bus.

Whenever conditions are present that require a warning message, the message center replaces the last selected display with the new warning message. Once the message is reset or cleared, the message center returns to the last selected display. If multiple warnings are present, the message center displays each warning for approximately 4 seconds. Warning messages are also generally associated with other observable IPC indications. For example, when the LH front door is opened, the message center displays the message DRIVER DOOR AJAR along with the door ajar warning indicator. This allows the message center to be a more informative supplement to the IPC gauges and indicators.