LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fiesta Titanium, 4D Hatchback, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Instrumentation, Message Center & Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Belt-Minder®

Principles of Operation: Belt-Minder®

The Belt-Minder® is configurable. To configure the Belt-Minder®, refer to BELT-MINDER® DEACTIVATING/ACTIVATING .

The Belt-Minder® feature supplements the current safety belt warning function and is enabled after the current safety belt warning is complete. The Belt-Minder® informs the driver that the driver or front passenger safety belt is unbuckled by intermittently and simultaneously sounding a chime and illuminating the safety belt warning indicator in the IPC once the vehicle speed has exceeded 9.7 km/h (6 mph). The Belt-Minder® remains active for 5 minutes from the time it is started. While activated, the Belt-Minder® chime provides a series of 6 chimes/safety belt warning indicator flash sequences, which consist of a 1-second chime tone and safety belt warning indicator on/off state. The Belt-Minder® chime and the safety belt warning indicator sound and flash for 6 seconds, then the chime stops and the safety belt warning indicator remains on for 30 seconds. The IPC repeats the chime cycle for 5 minutes.

If the vehicle speed drops below 4.8 km/h (3 mph) once the Belt-Minder® chime has activated, the chime turns off and the safety belt warning indicator remains on. When the vehicle speed exceeds 9.7 km/h (6 mph) again, the Belt-Minder® chime resumes.

The Belt-Minder® warning chime inputs are the:

scientia non olet · About LEMON Manuals