DTC P0444: Evaporative Emission System Purge Control Valve A Circuit Open
DTC P0444: EVAPORATIVE EMISSION SYSTEM PURGE CONTROL VALVE A CIRCUIT OPEN
| Description: | The PCM monitors the state of the EVAPCP circuit output driver. This DTC sets when the signal moves outside the minimum or maximum limit for the commanded state. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | To verify normal function, monitor the EVAPCP PID. With the valve closed, the EVAPCP indicates 0% duty cycle. When the valve is commanded fully open, the EVAPCP indicates 100% duty cycle. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HZ . | ||