Network Message Chart
MODULE NETWORK INPUT MESSAGES - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Dimmer switch position | BCM | Used to communicate the desired illumination level based on input from the dimmer switch |
| Ambient light level | BCM | Used to communicate the ambient lighting conditions (day or night) |
MODULE NETWORK INPUT MESSAGES - APIM, FCIM AND FCDIM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Illumination dimming level | IPC | Used to command illumination level for I-CAN modules |
MODULE NETWORK INPUT MESSAGES - BCM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Illumination dimming level | IPC | Used to command the illumination level for backlighting sources that are hardwired to the BCM. |
MODULE NETWORK INPUT MESSAGES - HVAC MODULE
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Illumination dimming level | IPC | Used to command the illumination level for the HVAC Module. |
MODULE NETWORK INPUT MESSAGES - DDM, PDM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Illumination dimming level | BCM | Used to command the illumination level for the window switches. |