LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AF: The Hill Start Assist Dispaly Is Never On >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

Refer to HILL START ASSIST SYSTEM DISPLAY  .

If the hill start assist status messages are missing for less than 2 seconds, the IPC defaults the hill start assist message center display to its last state (on or off), based upon the last known good message received.

If the BCM does not receive the hill start assist status messages for 2 seconds or longer, the BCM and the IPC set DTC U0121:00.

If the hill start assist status messages are missing, the IPC displays the hill start assist not available message in the message center.

scientia non olet · About LEMON Manuals