Power Shade Operation (Sunshade)

When sunshade switch OPEN is pressed to the second detent, the sunshade will automatically open and stop at the front of the fixed glass panel, leaving only the sliding glass panel exposed. Pressing sunshade switch OPEN to the second detent a second time (after the initial stop) will open the sunshade to the full open position. When the sunshade is open to any position beyond the front of the fixed glass and sunshade switch CLOSE is pressed to the second detent, the sunshade will automatically close only to front of the fixed glass panel. Pressing sunshade switch CLOSE to the second detent a second time (after the initial stop) will fully close the sunshade unless the sunroof is open to any position. If the sunroof is open when the sunshade switch CLOSE is pressed (to fully close), the sunroof will perform a one-touch close operation automatically which will then be followed by the sunshade operation that was requested. If the sunshade is in the closed position and sunroof switch OPEN is pressed, the sunshade will perform a one-touch open operation automatically which will then be followed by the sunroof operation that was requested. To partially open or close the sunshade, press sunshade switch OPEN or CLOSE only to the first detent and release at the desired position.