LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Removal And Installation >> Bumper - Rear, Without Trailer Hitch >> Removal and Installation

Removal and Installation

  1. Remove the rear bumper cover. Refer to BUMPER COVER - REAR .
  2. To install, tighten to 23 Nm (17 lb-ft).
    G08621381
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals