Pinpoint Test G: The Vehicle Does Not Start With The IA Key In Certain Areas Within The Vehicle
- G1 CHECK THE IA KEYS
- Verify the correct IA keys are used with the vehicle.
- Are the correct IA keys being used?
- Yes : GO to G2.
- No : OBTAIN the correct key(s) for the vehicle. PROGRAM the new key(s). REFER to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT .
- G2 CHECK FOR ENVIRONMENTAL INTERFERENCE
- Check for the use of any charger or other wireless device that can cause interference with the IA key. If any device is found, remove the device and attempt to start the vehicle.
- Does the vehicle start?
- Yes : The system is operating correctly. INFORM the customer of the normal vehicle operation.
- No : DISCARD the key in question and PROGRAM a new key. REFER to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT .