System Operation: Prove-Out
The IPC and other modules carry out a display prove-out to verify all module controlled warning/indicator lamps and monitored systems are functioning correctly within the IPC. The IPC and other modules, such as the RCM, provide a timed prove-out of some indicators while other indicators illuminate upon engine start up. When the ignition is cycled to on with the engine off, the indicators illuminate to prove-out according to the following table:
| Indicator | Indicator Type | Prove-Out Duration |
|---|---|---|
| ABS | Warning | 3 seconds |
| Air bag | Warning | 8 seconds |
| BLIS® | Informational | 3 seconds |
| Brake | Warning | 3 seconds |
| Charge | Warning | Engine startup |
| Fog lamp | Informational | None |
| Grade assist | Informational | None |
| High beam | Informational | None |
| Information | Informational | None |
| Lights on | Informational | None |
| Low fuel | Warning | 3 seconds |
| Low oil pressure | Warning | Engine startup |
| MIL | Warning | Engine startup |
| Safety belt | Warning | 70 seconds if the safety belt is unbuckled, turns off when the safety belt is buckled |
| Stability-traction control (sliding car icon) | Warning | 3 seconds |
| Stability-traction control disabled (sliding car OFF icon) | Informational | 3 seconds |
| TPMS | Warning | 3 seconds |
| RH/LH turn | Informational | None |