LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Parking Aid System - Active Park Assist >> Description And Operation >> Active Park Assist >> System Operation >> Active Park Assist Message Display

Active Park Assist Message Display

Active park assist messages are displayed in the centerstack infotainment display.

Conditions that cause the active park assist system to be cancelled (and the corresponding display/chime) are:

Cancellation Event Message Center Message And/Or Audible Chime
Grabbing the steering wheel while the active park assist system is controlling the steering. "Active Park Assist cancelled by driver input," followed by a chime
Exceeding vehicle speed above 29 kmh (18 mph) during the measuring phase for 30 consecutive seconds. "Reduce Speed"
Exceeding vehicle speed above 9.7 kmh (6 mph) when the system is controlling the steering. "Active Park Assist cancelled by high speed," followed by a chime
Deactivation of the AdvanceTrac® system by the operator, an ABS module or AdvanceTrac® event has occurred while the system has control of the steering. "Active Park Assist cancelled by AdvanceTrac" or "Active Park Assist cancelled by Anti-lock Brake System event," followed by a chime
Any vehicle door (except the driver door) or liftgate is opened when the system is controlling the steering, the operator engages DRIVE (D) before the vehicle is far enough inside the parking space, or the system cannot follow the desired steering path. "Active Park Assist Deactivated," followed by a chime
A vehicle attachment is detected, such as a trailer or bike rack, by the reverse parking aid system. "Active Park Assist is not available," followed by a chime
Any door (except the driver door) is ajar. "Active Park Assist is not available," followed by a chime