LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center, And Warning Chimes >> General Procedures >> Oil Life Reset

Oil Life Reset

  1. Without starting the engine, place the ignition in RUN.
  2. Simultaneously apply the accelerator and brake pedals and hold them in the fully applied position.
  3. After 3 seconds, the message center displays SERVICE: OIL RESET IN PROG.
  4. Continue to apply both the accelerator and brake pedals.
  5. The SERVICE: OIL RESET IN PROG message disappears after 25 seconds and the SERVICE: OIL RESET COMPLETE is displayed.
  6. Release both the accelerator and brake pedals.
  7. Place the ignition in OFF.
  8. The oil life reset procedure is complete.
scientia non olet · About LEMON Manuals