Network Message Chart
MODULE NETWORK INPUT MESSAGES - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Alarm/key programming chime request | BCM | Input used for the keyless key programming chime. |
| Alarm mode | BCM | Input used for the perimeter alarm chime. |
| Parking brake warning request | BCM | Input used for the parking brake warning chime. |
| Passive key status | BCM | Input used for the key left in vehicle chime. |
| Passive key out of vehicle | BCM | Input used for the passive key not inside of the vehicle chime. |
| Position light indication | BCM | Input used for the headlamps on chime. |
| Power mode | BCM | Input used for the key-in-ignition warning chime. |
| Safety belt status | RCM | Input used for the safety belt component of the Belt-Minder® chime. |
| Turn indicator command | BCM | Input used for the turn signals on chime tone (tick-tock). |
| Vehicle speed | ABS module | Input used for the vehicle speed component of the Belt-Minder® chime, the passive key out of the vehicle chime and the door ajar chime. |