LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - 6F50/6F55) >> Removal And Installation >> Manual Control Lever Shaft Seal >> Installation

Manual Control Lever Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply the specified lubricant to the specified component.

    Shop Supplies: Petroleum Jelly.

    Special Tool(s): Manual Lever Seal Installer 307-581.

    G08412501
  2. Install the TR sensor. Refer to DIGITAL TRANSMISSION RANGE (TR) SENSOR .
scientia non olet · About LEMON Manuals