LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - 6F50/6F55) >> Diagnosis And Testing >> Automatic Transmission >> Pinpoint Test K >> Diagnostic Overview >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different variant/trim than selected.

The TSS sensor is a Hall-effect sensor that sends a signal to the PCM that indicates transmission turbine shaft input speed. The TSS sensor provides converter turbine speed information for TCC strategy.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P0715 Turbine/Input Shaft Speed Sensor A Circuit No input from TSS sensor.
P0717 Turbine/Input Shaft Speed Sensor A Circuit No Signal No input from TSS sensor.
P0718 Turbine/Input Shaft Speed Sensor A Circuit Intermittent Unrealistic change in TSS sensor signal, erratic or intermittently no input.