Normal Operation and Fault Conditions
WARNING: This page is about a different variant/trim than selected.
The LPC solenoid is a VFS. The LPC solenoid is an electro-hydraulic actuator combining a solenoid and a regulating valve. It supplies the pressure which regulates transmission line pressure. This is done by producing resisting forces to the main regulator and line modulator circuits. These 2 pressures control clutch application pressures.
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0748 | LPC electrical circuit general fault | LPC electrical circuit general fault. May set along with P0960, P0962 and P0963. |
| P0960 | LPC electrical circuit open fault | Open circuit in solenoid circuitry. |
| P0962 | LPC electrical circuit short to ground fault | Short to ground in solenoid circuitry. |
| P0963 | LPC electrical circuit short to power fault | Short to power in solenoid circuitry. |