LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - 6F50/6F55) >> Diagnosis And Testing >> Automatic Transmission >> Pinpoint Test H >> Diagnostic Overview >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different variant/trim than selected.

The TCC solenoid is used in the transmission control system to control the application, modulation and release of the torque converter.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P0740 TCC solenoid open circuit Open circuit in the TCC solenoid or wire harness.
P0742 TCC solenoid circuit short to ground Short to ground in the TCC solenoid or wire harness.
P0743 TCC solenoid circuit electrical Open or short to ground in the TCC solenoid or wire harness.
P0744 TCC solenoid circuit short to power Short to power in the TCC solenoid or wire harness.
scientia non olet · About LEMON Manuals