Normal Operation and Fault Conditions
WARNING: This page is about a different variant/trim than selected.
SSC is a VFS. The PCM controls the current flow through the solenoid ground input.
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0760 | SSC | Open circuit in the solenoid or wire harness. |
| P0763 | SSC electrical | Open circuit in the solenoid or wire harness. |
| P0979 | SSC control circuit low | Short to ground in the solenoid or wire harness. |
| P0980 | SSC control circuit high | Open circuit or short to power in the solenoid or wire harness. |