Section 4 (Rear Drive HALFSHAFTS): Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Item |
Specification |
| Left rear halfshaft assembled length |
753.6 mm (29.67 in) |
| Right rear halfshaft assembled length |
805.3 mm (31.70 in) |
LUBRICANTS AND CAPACITIES
| Description |
Nm |
lb-ft |
lb-in |
| Wheel hub nuta |
- |
- |
- |
| Wheel speed sensor bolt |
7 Nm |
- |
62 lb-in |
a
Refer to the procedure