LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transmission Cooling - 6F50/6F55) >> Removal And Installation >> Cooler Bypass Valve >> Installation

Cooler Bypass Valve: Installation

WARNING: This page is about a different variant/trim than selected.
    • Tighten to 9 Nm (80 lb-in).
      G08616161
  1. G08616203
  2. G08616166
    • Tighten to 30 Nm (22 lb-ft).
      G08616198
  3. Install the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION SYSTEM & INTAKE AIR FILTERING SYSTEM .
  4. Install the air cleaner. For additional information, refer to INTAKE AIR DISTRIBUTION SYSTEM & INTAKE AIR FILTERING SYSTEM .
  5. Check the transmission fluid level and add transmission fluid as necessary.